rigid

Showing all 15 results

  • Custom Rigid Frame 40° Rake
    free shipping

    Custom Rigid Frame 40? Rake

    $838.26
    more information

    VT No: 51-1027
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch and is disc brake type. Will accept Wide Glide fork assembly, oil tank, Evolution engine, 1″ neck cups which must be ordered separately. Frame will accommodate belt or chain drive with a 140 tire. For use on 1983-03 XL model; 1979-85 models require use of #37-0481 spacer set. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

  • Custom Rigid Frame 40° Rake
    free shipping

    Custom Rigid Frame 40? Rake

    $897.78
    more information

    VT No: 51-1028
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch in front tubes and is mechanical brake type. Will accept Wide Glide fork assembly , oil tank, iron head engine, 1″ neck cups, battery box which must be ordered separately. Will accepts right side transmission only. For use on 1957-79 XL models, this application requires modification of rear motor mount to accept kick shaft. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

  • Custom Rigid Frame 40° Rake
    free shipping

    Custom Rigid Frame 40? Rake

    $957.31
    more information

    VT No: 51-0107
    Custom rigid frame features a 40° rake, 2-1/4″ stretch, and is disc brake type.
    Frame accepts 180 tire with chain drive, custom oil tank, and battery tray with strap. Accepts left side drive, 4 or 5-speed transmission, and Evolution engine. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

  • Custom Rigid Frame 40° Rake
    free shipping

    Custom Rigid Frame 40? Rake

    $1,135.88
    more information

    VT No: 51-1031
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch. Will accept Wide Glide fork assembly , oil tank, ironhead engine, 1″ neck cups, 1987-1999 caliper assembly, and a 140 tire which must be ordered separately. Frame is disc brake type and will accept right side drive. For use on 1952-78 XL models; 1957-79 applications require modification of rear motor mount to accept kick shaft, 1975-76 models require the use of forward controls, and 1979-85 models require use of #37-0481 spacer set. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect.
    Fits:
    Custom application
    UOM: 1 – KIT
    Country of Origin: USA

  • Replica Retro Rigid 30° Rake Frame
    free shipping

    Replica Retro Rigid 30? Rake Frame

    $1,256.12
    more information

    VT No: 51-1957 Replica retro rigid frame straight leg style features original construction including forged parts in neck side car mounts and rear axle area. Frame is an exact replica of the original style updated to accept flat side tanks. For all Big Twin engines. Accepts Panhead Shovelhead Evolution or TC-88 engine with 4 5 or 6 speed transmission. Shovelhead Evo and Twin Cam engines require a tin inner primary. Accepts Knuckle or Flathead engine with mount spacer. Use with disc brake and 87-UP style rear caliper 86-89 ST tanks rear tire (230 w/ chain or 200 w/ belt or chain drive) rigid rear axle 3/4″ axle plates transmission mount plate inner primary cover flange spacers and extended sprocket shaft and nut set allrelated parts available separately. Will not accept a stock seat post. Has 2+” raised neck and 10.75″ between the axle plates. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a MSO is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1948-1965 FX 1971-1999 UOM: 1 – EA Country of Origin: Imported

  • Replica Wishbone Frame Kit
    free shipping

    Replica Wishbone Frame Kit

    $1,840.95
    more information

    VT No: 51-1949 Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post axle and transmission plate already installed. Frame will accept Panhead or Shovelhead engine with 4-speed transmission. Will also accept Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features seat post axle transmission plate mechanical brake cross shaft bushings tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Original forged parts include: Neck front and rear engine mounts side car mounts top seat post yoke footboard tabs and rear axle plates. Neck will accept key lock. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1948-1984 FX 1971-1984 UOM: 1 – KIT Country of Origin: Imported

  • Replica Rigid Frame
    free shipping

    Replica Rigid Frame

    $1,868.62
    more information

    VT No: 51-1956 Replica straight leg rigid frame with cross tube is for chain drive models. This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck front and rear engine mount side car mounts top seat yoke axle seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. The frame has an indent on the left lower rear frame bar for tooling fixture. A Bill of Sale is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application FL 1954-1957 UOM: 1 – EA Country of Origin: Imported

  • Replica Wishbone Frame Kit
    free shipping

    Replica Wishbone Frame Kit

    $1,898.63
    more information

    VT No: 51-1200 Replica Wishbone frame is an authentic reproduction of a 1949-52 Big Twin rigid frame with a 30° rake. Includes seat post transmission plate and axle kit. Will accept Panhead or Shovelhead engine with 4-speed transmission. Also accepts Knuckle or Flathead engine with use of a front engine mount spacer. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Frame details include forged parts as original including neck front and rear engine mounts side car loops top seat post yoke footboard tabs and rear axle plates. Neck will accept key lock. **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1949-1952 UOM: 1 – KIT Country of Origin: Imported

  • Replica Knucklehead 28° Rake Frame
    free shipping

    Replica Knucklehead 28? Rake Frame

    $1,907.24
    more information

    VT No: 51-1041 Replica Knucklehead frame is an authentic reproduction of the factory style frame. Tool box pads are round shape and positioned to mount rectangular tool box. Frame includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate pre-installed for safer shipping. Cross shaft bushings correct tool box mount and grease fittings are also installed. Tool box pads are round shape and positioned to mount rectangular tool box. Forged parts in the construction include: Neck with original DIF forging marks on the left side front and rear motor mounts yoke side car loops and rear axle plates. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

  • Replica Knucklehead 29° Rake Rigid Frame
    free shipping

    Replica Knucklehead 29? Rake Rigid Frame

    $1,926.33
    more information

    VT No: 51-1941 OEM No: 47003-41 Knucklehead rigid frame is an authentic reproduction of the factory style frame. Includes seat post assembly transmission mount plate and rear axle kit installed all with parkerized finish. The 29° neck angle will accept inline spring forks. This frame measures 13-11/16″ from the rear motor mount following the seat post and straight up to the backbone. Features exact replica “saddles” brazed at each end for read render crossbar support. Frame requires purchase of clamp on coil bracket kit. **NOTE: Seat post and cross shaft bushings may requi re further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1941 to early 1946 EL 1941 to early 1946 U 1941 to early 1946 UOM: 1 – EA Country of Origin: Imported

  • Replica Knucklehead Frame 28° Rake
    free shipping

    Replica Knucklehead Frame 28? Rake

    $1,969.14
    more information

    VT No: 51-1938 Replica frame is an authentic reproduction of the factory style with brazed joints. Frame will accommodate Knucklehead or Big Twin Flathead engines and 3 or 4-speed transmission. The 28° rake neck angle will accept inline spring forks. Frame includes seat post mechanical brake cross shaft rear axle assembly transmission plate and motor alignment plate pre-installed for safer shipping. Cross shaft bushings tool box mount and grease fittings are also installed. Tool box pads are round but are positioned to mount rectangular tool box. The construction includes; Forged parts: Neck with original DIF forging marks front and rear engine mounts yoke and rear axle plates. Brazed parts: Top motor mount front tank mount side car loops footboard mount transmission strap center post strap rear fender cross bar saddles oil tank mount and upper rear frame bars at tank tube. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

  • Replica Knucklehead 30° Rake Frame
    free shipping

    Replica Knucklehead 30? Rake Frame

    $1,969.19
    more information

    VT No: 51-1947 Knucklehead frame is an authentic reproduction of the factory style bull neck frames. Forged parts included in the construction are the neck front and rear motor mounts side car loops yoke and rear axle plates. The 30° neck angle will accept offset spring forks. Top cross member across rear legs is brazed as on original Knucklehead frames. Seat post is included. Seat post bushings mechanical brake cross shaft bushings correct tool box mount and grease fittings are installed. Manufacturer’s Statement of Origin is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1946-1947 From late 1946 to early 1947 U 1946-1947 From late 1946 to early 1947 EL 1946-1947 From late 1946 to early 1947 UOM: 1 – EA Country of Origin: Imported

  • Replica Knucklehead 28° Rake Frame
    free shipping

    Replica Knucklehead 28? Rake Frame

    $1,969.21
    more information

    VT No: 51-1039
    Replica frame is an authentic reproduction of the factory style. The 28° rake neck angle will accept inline spring forks. Features original DIF forging marks on the left side of the neck.
    Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. Horizontal frame cross bar features 7/8″ O.D. tubing. Frame includes seat post, mechanical brake cross shaft, rear axle assembly, transmission plate and a motor alignment plate for safer shipping. Cross shaft and bushings, seat post, rear axle assembly, transmission plate, correct tool box mount and grease fittings are pre-installed. Forged parts in the construction are: neck, front and rear motor moun s, yoke, side car loops and rear axle plates. *NOTE: For original look on rear axle plates, the rear brake slot on the left side must be cut out at the front. We have left this “closed” for the builder to remove as desired. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. Therefore frames will not be accepted for return (RGA). *NOTE: There are no serial numbers stamped on the replica frame. V-TWin MFG supply a Bill of Sale only referencing the part number. *Note: UPS may consider
    Fits:
    EL 1937-1937
    UOM: 1 – EA
    Country of Origin: Imported

  • Replica Wishbone Frame Kit
    free shipping

    Replica Wishbone Frame Kit

    $1,988.86
    more information

    VT No: 51-1953 Replica wishbone frame kit is an authentic reproduction of a 1954 Big Twin rigid frame which includes seat post axle and transmission plate already assembled. Frame will accept Panhead or Shovelhead engine with 4-speed transmission. Will also accept Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features seat post axle transmission plate mechanical brake cross shaft bushings tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Original forged parts include: Neck front and rear engine mounts side car mounts top seat post yoke footboard tabs and rear axle plates. Neck will accept key lock. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application UOM: 1 – KIT Country of Origin: Imported

  • Replica 1936 Knucklehead Frame
    free shipping

    Replica 1936 Knucklehead Frame

    $2,502.43
    more information

    VT No: 51-1040 OEM No: 2801-36 Replica frame is an authentic reproduction of the factory style with 13 brazed joints. The 28° rake neck angle will accept inline spring forks. Frame features 1″ down tubes with weld on sidecar mounts specific to the 1936 model only! Accepts Knucklehead or BT Flathead engine and 3 or 4-speed transmission. Includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate for safer shipping. Cross shaft bushings tool box mount and grease fittings are installed. Forged parts: Neck with original DIF forging marks front and rear engine mounts yoke and rear axle plates. Brazed parts: Top motor mount front tank mount sidecar loops footboard mount transmission strap center post strap rear fender cross bar saddles oil tank mount and upper rear frame bars at tank tube. **NOTE: For original look on rear axle plates the rear brake slot on the left side must be cut out at the front. We have left this “closed” for builder to remove as desired. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available *Note: UPS may consider Fits: EL 1936-1936 UOM: 1 – EA Country of Origin: Imported