frame

Showing 1–16 of 20 results

  • License Plate Frame Backing Plate Chrome

    License Plate Frame Backing Plate Chrome

    $24.89
    more information

    VT No: 42-1547
    License plate frame backing plate features a chrome finish.
    Fits:
    Custom application for 4″ x 7″ license plates
    UOM: 1 – EA
    Country of Origin: Imported

  • Universal Frame Tube Stantion

    Universal Frame Tube Stantion

    $41.61
    more information

    VT No: 31-0048 Universal frame tube stantion features a raw steel finish. Investment cast steel is drilled and tapped with 3/8″ x 16 threads. Radius can fit over 1″ tube and is able to be brazed or welded in place. Great for seat spring perch. Coped radius can be opened up to fit 1-1/8″ or 1-1/4″ tubing. Meaures 1″ tall from tube. Fits: All Models UOM: 1 – EA Country of Origin: Imported

  • Universal Weld On Bracket Set

    Universal Weld On Bracket Set

    $41.61
    more information

    VT No: 31-0056 Universal weld on bracket set features a raw finish. Investment cast steel radius can fit over 1″ tube with a 1/4″ mounthole. Hole is 1-1/4″ from the radius center. Set has 1/4 holes that can be tapped to a 5/16 thread. The coped radius can be opened up to fit 1-1/8 or 1-1/4 tubing. Fits: All models UOM: 1 – SET Country of Origin: Imported

  • Lower Tank Mount Tab Set

    Lower Tank Mount Tab Set Raw

    $45.28
    more information

    VT No: 51-0644 Lower tank mount tab set features a raw finish. Right and left side must be welded on. Fits: FL 1948-1954 UOM: 1 – EA Country of Origin: Imported

  • Speedometer Mount Frame Casting

    Speedometer Mount Frame Casting

    $82.59
    more information

    VT No: 51-0067 Speedometer mount frame casting must be welded. Features provision for steering damper pin. Fits: FL 1948-1984 UOM: 1 – EA Country of Origin: Imported

  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $838.26
    more information

    VT No: 51-1027
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch and is disc brake type. Will accept Wide Glide fork assembly, oil tank, Evolution engine, 1″ neck cups which must be ordered separately. Frame will accommodate belt or chain drive with a 140 tire. For use on 1983-03 XL model; 1979-85 models require use of #37-0481 spacer set. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

    Free Shipping
  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $897.78
    more information

    VT No: 51-1028
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch in front tubes and is mechanical brake type. Will accept Wide Glide fork assembly , oil tank, iron head engine, 1″ neck cups, battery box which must be ordered separately. Will accepts right side transmission only. For use on 1957-79 XL models, this application requires modification of rear motor mount to accept kick shaft. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

    Free Shipping
  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $957.31
    more information

    VT No: 51-0107
    Custom rigid frame features a 40° rake, 2-1/4″ stretch, and is disc brake type.
    Frame accepts 180 tire with chain drive, custom oil tank, and battery tray with strap. Accepts left side drive, 4 or 5-speed transmission, and Evolution engine. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect. *Note: UPS may consider this part as packaged “oversize” for shipment, as compared to the actual weight, which will result in higher shipping costs.
    Fits:
    Custom application
    UOM: 1 – EA
    Country of Origin: USA

    Free Shipping
  • Custom Rigid Frame 40° Rake

    Custom Rigid Frame 40? Rake

    $1,135.88
    more information

    VT No: 51-1031
    Custom rigid frame features flatside bobbed tank mounts, kickstand mount, and sissy bar tabs.
    Frame has a 40° rake and 1″ stretch. Will accept Wide Glide fork assembly , oil tank, ironhead engine, 1″ neck cups, 1987-1999 caliper assembly, and a 140 tire which must be ordered separately. Frame is disc brake type and will accept right side drive. For use on 1952-78 XL models; 1957-79 applications require modification of rear motor mount to accept kick shaft, 1975-76 models require the use of forward controls, and 1979-85 models require use of #37-0481 spacer set. Manufacturer’s Statement of Origin is supplied for the frame. **NOTE: All frames are shipped to the lower 48 states by carrier truck, please allow extra time for delivery. All other shipments will be made air freight collect.
    Fits:
    Custom application
    UOM: 1 – KIT
    Country of Origin: USA

    Free Shipping
  • Early Replica Swingarm Frame

    Early Replica Swingarm Frame

    $1,440.52
    more information

    VT No: 51-1003 Replica swingarm frame is an authentic reproduction of FLH style for 1958-1964 kick start models only. Frame accepts Panhead or Shovelhead engine 4-speed left side drive transmission seat post and round or square swingarms. Details include forged parts as original in neck motor mounts front transmission mount top seat post yoke strut and swingarm pivot mount and footboard mount. Frame features lower drop fram and accepts 6 Volt battery early wrap around oil tank kick start and includes footboard tabs. Neck will accept plunger type lock assembly and features provision for lock insert. Seat post and transmission plate included. Manufacturer’s Statement of Origin is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1958-1964 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Wishbone Frame Kit

    Replica Wishbone Frame Kit

    $1,840.95
    more information

    VT No: 51-1949 Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post axle and transmission plate already installed. Frame will accept Panhead or Shovelhead engine with 4-speed transmission. Will also accept Knuckle or Flathead engines with use of a 3/8″ front engine mount spacer. Features seat post axle transmission plate mechanical brake cross shaft bushings tool box mount and grease fittings already installed. Crossbar features a cable mount tab under the gas tank. Original forged parts include: Neck front and rear engine mounts side car mounts top seat post yoke footboard tabs and rear axle plates. Neck will accept key lock. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1948-1984 FX 1971-1984 UOM: 1 – KIT Country of Origin: Imported

    Free Shipping
  • Replica Rigid Frame

    Replica Rigid Frame

    $1,868.62
    more information

    VT No: 51-1956 Replica straight leg rigid frame with cross tube is for chain drive models. This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck front and rear engine mount side car mounts top seat yoke axle seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. The frame has an indent on the left lower rear frame bar for tooling fixture. A Bill of Sale is supplied. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: Custom application FL 1954-1957 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Wishbone Frame Kit

    Replica Wishbone Frame Kit

    $1,898.63
    more information

    VT No: 51-1200 Replica Wishbone frame is an authentic reproduction of a 1949-52 Big Twin rigid frame with a 30° rake. Includes seat post transmission plate and axle kit. Will accept Panhead or Shovelhead engine with 4-speed transmission. Also accepts Knuckle or Flathead engine with use of a front engine mount spacer. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Frame details include forged parts as original including neck front and rear engine mounts side car loops top seat post yoke footboard tabs and rear axle plates. Neck will accept key lock. **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1949-1952 UOM: 1 – KIT Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead 28° Rake Frame

    Replica Knucklehead 28? Rake Frame

    $1,907.24
    more information

    VT No: 51-1041 Replica Knucklehead frame is an authentic reproduction of the factory style frame. Tool box pads are round shape and positioned to mount rectangular tool box. Frame includes seat post brake cross shaft rear axle assembly transmission plate and a motor alignment plate pre-installed for safer shipping. Cross shaft bushings correct tool box mount and grease fittings are also installed. Tool box pads are round shape and positioned to mount rectangular tool box. Forged parts in the construction include: Neck with original DIF forging marks on the left side front and rear motor mounts yoke side car loops and rear axle plates. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead 29° Rake Rigid Frame

    Replica Knucklehead 29? Rake Rigid Frame

    $1,926.33
    more information

    VT No: 51-1941 OEM No: 47003-41 Knucklehead rigid frame is an authentic reproduction of the factory style frame. Includes seat post assembly transmission mount plate and rear axle kit installed all with parkerized finish. The 29° neck angle will accept inline spring forks. This frame measures 13-11/16″ from the rear motor mount following the seat post and straight up to the backbone. Features exact replica “saddles” brazed at each end for read render crossbar support. Frame requires purchase of clamp on coil bracket kit. **NOTE: Seat post and cross shaft bushings may requi re further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. *Note: UPS may consider this part as packaged “oversize” for shipment as compared to the actual weight which will result in higher shipping costs. Fits: FL 1941 to early 1946 EL 1941 to early 1946 U 1941 to early 1946 UOM: 1 – EA Country of Origin: Imported

    Free Shipping
  • Replica Knucklehead Frame 28° Rake

    Replica Knucklehead Frame 28? Rake

    $1,969.14
    more information

    VT No: 51-1938 Replica frame is an authentic reproduction of the factory style with brazed joints. Frame will accommodate Knucklehead or Big Twin Flathead engines and 3 or 4-speed transmission. The 28° rake neck angle will accept inline spring forks. Frame includes seat post mechanical brake cross shaft rear axle assembly transmission plate and motor alignment plate pre-installed for safer shipping. Cross shaft bushings tool box mount and grease fittings are also installed. Tool box pads are round but are positioned to mount rectangular tool box. The construction includes; Forged parts: Neck with original DIF forging marks front and rear engine mounts yoke and rear axle plates. Brazed parts: Top motor mount front tank mount side car loops footboard mount transmission strap center post strap rear fender cross bar saddles oil tank mount and upper rear frame bars at tank tube. **NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. For this reason frames will not be accepted for return (RGA). **NOTE: In lieu of a serial number a Manufacturer’s Statement of Origin is available upon request. Fits: EL 1938-1940 UOM: 1 – EA Country of Origin: Imported

    Free Shipping