Shop

Showing 49–64 of 15128 results

  • 1-1/2" Chrome Concho

    1-1/2 Chrome Concho

    $44.90
    more information

    VT No: 48-1433 1-1/2″ chrome plated steel concho. Sold as a pack of 50. Fits: All models UOM: 50 – PK Country of Origin: Imported

  • 1-1/2" Linkert Carburetor Overhaul Kit

    1-1/2 Linkert Carburetor Overhaul Kit

    $113.67
    more information

    VT No: 35-9194 Overhaul kit for 1-1/2″ carburetors includes throttle shaft brass float needle and seat float bushings springs float pin gasket carburetor bowl large nut with stud lock washer luck nut and copper filled seal washer. For M74 models. Threads on this needle and seat assembly is 7/16 x 27. Fits: FL 1941-1965 EL 1941-1952 UOM: 1 – KIT Country of Origin: Imported

  • 1-1/2" Linkert Carburetor Throttle Shaft

    1-1/2 Linkert Carburetor Throttle Shaft

    $34.32
    more information

    VT No: 35-9152 OEM No: 27276-40 Replica brass Linkert throttle shaft is for a 1-1/2″ carburetors. Fits the following Linkert Carburetors: M-25 M-35T M-36 M-45 M-45A M-61 M-74 M-74B M-75. Fits: FL 1941-1965 UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Linkert Carburetor Throttle Shaft

    1-1/2 Linkert Carburetor Throttle Shaft

    $35.81
    more information

    VT No: 35-9192 OEM No: 27276-40A Replica brass Linkert throttle shaft is for 1-1/2″ carburetors. Fits the following Linkert Carburetors: M-25 M-35T M-36 M-45 M-45A M-61 M-74 M-74B M-75. Fits: FL 1941-1965 UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Linkert Carburetor Throttle Shaft

    1-1/2 Linkert Carburetor Throttle Shaft

    $37.63
    more information

    VT No: 35-9238 OEM No: 27276-40 Replica brass linkert throttle shaft for 1-1/2″ carburetors. Accepts 6/32 x 1/4 round head scres to install throttle in place. Fits the following Linkert Carburetors: M-25 M-35T M-36 M-45 M-45A M-61 M-74 M-74B M-75. Fits: FL 1941-1965 UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Pipe Baffle Set

    1-1/2 Pipe Baffle Set

    $30.59
    more information

    VT No: 30-1419 Baffle pipe set fits inside drag pipes. 1-1/2″ denotes the size of the pipe into which the baffle fit. Baffle is 8″ long and the baffle outer diameter is 1.37″. Set comes in fiberglass packing Fits: Custom UOM: 1 – SET Country of Origin: Imported

  • 1-1/2" Short Riser Set Black

    1-1/2 Short Riser Set Black

    $64.68
    more information

    VT No: 25-2221 Top it off in style and add a custom touch to your bike with this black 1-1/2″ shorty riser set. Risers have a 1/2″-13 thread for 1″ handlebars. Fits: Custom application UOM: 2 – SET Country of Origin: Imported

  • 1-1/2" Short Riser Set Chrome

    1-1/2 Short Riser Set Chrome

    $55.33
    more information

    VT No: 25-2184 Top it off in style and add a custom touch to your bike with this chrome 1-1/2″ shorty riser set. Risers have a 1/2″-13 thread for handlebars. For use on any handlebar with a 1″ diameter in the clamping area. Riser set is manufactured to meet OEM specifications for long lasting duarbaility and performance. These risers have a slight curve across the tops. Fits: Custom application UOM: 2 – SET Country of Origin: Imported

  • 1-1/2" Super Bar Handlebar without Indents

    1-1/2 Super Bar Handlebar without Indents

    $47.12
    more information

    VT No: 25-0660 1″ chrome handlebar with knurls. Both sides accept spiral controls. Fits: FL 1974-1981 FX 1974-1981 XL 1974-1981 UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Tilt-Up Seat Mount Bracket Front Black

    1-1/2 Tilt-Up Seat Mount Bracket Front Black

    $18.89
    more information

    VT No: 31-1035 Low profile black tilt up front seat mount bracket is square style. Bracket is 1-1/2″ wide and allows the seat to be mounted to frame tubes. Bracket permits your seat to flip over the gas tank for easy access to the battery and electrical components. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Tilt-Up Seat Mount Bracket Front Zinc

    1-1/2 Tilt-Up Seat Mount Bracket Front Zinc

    $26.92
    more information

    VT No: 31-4026 Low profile zinc tilt up front seat mount bracket is square style. Bracket is 1-1/2″ wide and allows the seat to be mounted to frame tubes. Bracket permits your seat to flip over the gas tank for easy access to the battery and electrical components. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

  • 1-1/2" Tilt-Up Seat Nose Bracket Zinc

    1-1/2 Tilt-Up Seat Nose Bracket Zinc

    $23.11
    more information

    VT No: 31-4194 Zinc 1-1/2″ tilt-up nose bracket will allow you to tilt your seat forward when needed. Bracket is 6-7/8″ long. Fits: Custom application UOM: 1 – EA Country of Origin: Imported

  • 1-1/4" Beach Bar Handlebar with Indents

    1-1/4 Beach Bar Handlebar with Indents

    $113.61
    more information

    VT No: 25-0709 1-1/4″ beach bar is pre drilled for internal wiring. The shape provides comfort with control. Use with stock risers and clamps. Fits: FL 1982-1984 FX 1982-1984 XL 1982-UP FLST 1986-UP FXST 1984-UP FXR 1982-1984 FXR 1985-1994 FXD 1991-UP FLT 1982-1984 FLT 1985-2007 UOM: 1 – EA Country of Origin: Imported

  • 1-1/4" Riser Sleeves Chrome

    1-1/4 Riser Sleeves Chrome

    $32.16
    more information

    VT No: 28-0442 Chrome 1-1/4″ riser sleeves for use with drag bars Sold in a quanity of 2. Fits: Custom application UOM: 1 – SET Country of Origin: Imported

  • 1-1/8" Carburetor Venturi .025 Oversize

    1-1/8 Carburetor Venturi .025 Oversize

    $56.58
    more information

    VT No: 2710-1 Oversized Linkert carburetor 1-1/8″ venturi is precision machined aluminum and made to exact tolerances for perfect fit and performance. Replacement venturi for M61B, M61, M36A, M36, M35, M35T, M35TP caburetors. Fits: Replacement application UOM: 1 – EA Country of Origin: USA

  • 1-1/8" Flanders Style Riser Stems

    1-1/8 Flanders Style Riser Stems

    $63.23
    more information

    VT No: 25-1275 Riser stems are chrome plated steel and have a 3/4″-16 UNF thread to screw into spring fork rear legs. The spring fork rear legs must be threaded to accept risers. Use tops and bushings from existing Flanders risers. Installation of these riser stems requires tapping of the rear leg tube to 3/4 x 16 for mounting. Requires the use of a 3/4″-16 UNF tap. Fits: FL 1941-1948 W 1936-1952 G 1936-1957 EL 1936-1948 U 1937-1948 UOM: 1 – SET Country of Origin: Imported